Features: - Pentium III w/FSB 66/100/133MHz
- 3 x 168-pin DIMM sockets 1GB (max)
- VIA 2D/3D AGP VGA
- 2 x Enhanced IDE ports
- 2D/3D AGP VGA On-board
- Realtek 8139C PCI Fast Ethernet Controller
|
| GENERAL |
|---|
| Form Factor: Full size PICMG bus CPU card | | CPU: Intel Celeron and Pentium III processors with FSB 66/100/133 MHz | | Memory: 3 x 168-pin DIMM sockets support PC/VCM 133/100 SDRAM up to 1GB | | Chipset: VIA PLE133 Chipset | | BIOS: AMI system BIOS with 256KB Flash ROM | Enhanced IDE Interface: 2 x enhanced IDE ports up to four HDD and Ultra DMA/33/66/100 supported
| | Watchdog Timer: Support 8 intervals from 0.5 sec./min. to 64 sec./max. by hardware jumper setting | | VGA Interface: VIA 2D/3D AGP VGA; 1280 X 1024 with 256 colors at refresh rates 60Hz; Display cache with shared memory up 8MByte |
|
| EXPANSION INTERFACE |
|---|
| Solid State Disk: 1 x 32-pin socket for M-systems reserved; Flash Disk up to 288MB; DOS, Windows, Win95, NT (bootable) drivers and Utility supported |
|
| ETHERNET |
|---|
| LAN Interface: RealTek 8139C PCI Fast Ethernet Controller rated LAN controller to support RJ-45 |
|
| I/O |
|---|
| Serial Ports: 2 x high-speed 16C550 compatible ports | | Parallel Port: 1 x parallel port with SPP, EPP and ECP Modes | | USB Ports: 2 x USB ports for high-speed I/O peripheral devices (For a standalone application, both USB ports may be available. For installing 3307114 in a standard Chassis, physical limitation will only allow one USB port to be available) | | IrDA Port: 1 x 6-pin header for serial Standard Infrared wireless communication | | Floppy Drive Port: 1 x FDD port up to two floppy drives | | PS/2 Ports: 1 x 6-pin Mini-DIN connector and one 5-pin shrouded connector for PS/2 use/keyboard connection | | Other I/O: Bus Interface: Follow PICMG 1.0 Revision 2.0 standard (32-bit PCI and 16-bit ISA) On-board 68-pin PCI device connector: Support one additional PCI device daughter board High Driving Capability: Support 64mA high driving capability for multi-slots ISA-bus |
|
| POWER |
|---|
| Power Consumption: ATX Power Control Interface: One 4-pin header to support ATX power control with Modem Ring-On and Wake-On-LAN function Power Requirement: +5V @8A, +12V@150mA, -12V @20mA | | Power Management: External Power Connector: Support one standard 5-1/4 |
|
| MECHANICAL/ENVIRONMENTAL |
|---|
| Board Dimensions: L = 13.33" (133.5mm) x W = 4.8" (122.0 mm) PCB layout: 6 layer | | Operating Temperature: 32 ~ 140°F (0 ~ 60°C ) | | Storage Temperature: -4 ~ 167°F (-20 ~ 75°C ) | | Relative Humidity: 5%~95%, non-condensing | | OS Software Supported: All popular Operating System Software including MS DOS, LINUX, Windows 3.11 / 95 / 98 / NT / 2000 / XP. Not all features are guaranteed to work under every O/S. |
Ordering Options:
|
| 3307114 | Full-Size PICMG Socket 370 Pentium III / Celeron CPU SBC with CRT SVGA, 10/100 LAN and Disk-On-Chip Interfaces |
|
