$3302130 - 3.5\" Embedded Controller with Intel Celeron M 1.0 GHz or 600 MHz Processor$

3302130

3302130 - 3.5" Embedded Controller with Intel Celeron M 1.0 GHz or 600 MHz Processor

Features:

3.5" Embedded Controller with Embedded Intel Celeron M 1.0 GHz Zero Cache Processor or Intel Celeron M 600 MHz Processor (optional), FSB up to 400 MHz
one 200-pin SO-DIMM Socket supporting up to 1.0 GB DDR 200/266 MHz SDRAM (solder-side)
Intel 852GM and ICH4 Chipsets
one 32-bit/33 MHz Mini-PCI Type-III Socket
one 44-pin Ultra ATA-33 MHz IDE Channel - Supports up to two IDE devices
Intel Chipset CRT SVGA - up to 64 MB video memory shared with system memory, 18/36-bit SINGLE Channel LVDS, DUAL Mode Independent Display
SINGLE Intel 82562ET 10/100 LAN
two Serial ports - two RS-232C, one Parallel port supports SPP/EPP/ECP modes, six USB ports - version 2.0, one Floppy port (shared with Parallel port), one PS/2 Keyboard/Mouse port, one 8-bit GPIO (Can be programmed as a parallel port for printer interface.)
RealTek ALC655 AC-97 Compatible Audio (Mic-in / Line-in / Line-out)
one Compact Flash Type-I/II Socket (solder-side)

GENERAL
Form Factor: 3.5" Embedded Controller
CPU: Embedded Intel Celeron M 1.0 GHz Zero Cache Processor or Intel Celeron M 600 MHz Processor (optional), FSB up to 400 MHz
Memory: one 200-pin SO-DIMM Socket supporting up to 1.0 GB DDR 200/266 MHz SDRAM (solder-side)
Chipset: Intel 852GM and ICH4 Chipsets
BIOS: Phoenix-Award PnP Flash BIOS
Enhanced IDE Interface: one 44-pin Ultra ATA-33 MHz IDE Channel - Supports up to two IDE devices
Watchdog Timer: Generates system reset, 256 levels

AUDIO/VIDEO
Audio Interface: RealTek ALC655 AC-97 Compatible Audio (Mic-in / Line-in / Line-out)
VGA Interface: Intel Chipset CRT SVGA - up to 64 MB Video Memory shared with System Memory
LCD Interface: 18/36-bit SINGLE Channel LVDS, DUAL Mode Independent Display

EXPANSION INTERFACE
Solid State Disk: one Compact Flash Type-I/II Socket (solder-side)

ETHERNET
LAN Interface: SINGLE Intel 82562ET 10/100 LAN

I/O
Serial Ports: two Serial ports - two RS-232C
Parallel Port: one Parallel port supports SPP/EPP/ECP modes
USB Ports: six USB ports - version 2.0
Floppy Drive Port: one Floppy port (shared with Parallel port)
PS/2 Ports: one PS/2 Keyboard/Mouse port
Expansion Slot: one 32-bit/33 MHz Mini-PCI Type-III Socket
Other I/O: one 8-bit GPIO (Can be programmed as a parallel port for printer interface.)

POWER
Power Consumption: +5V:1.66A – 8.3 Watts is the Typical Power Consumption with an Intel Celeron M 600 MHz Processor, ELPIDA DD2516AMTA*8 DDR 333 MHz 256 MB SDRAM, Maxtor 40 GB HDD, Zippy ZKX-300WX Power Supply, and Windows XP Operating System
Power Management: 4-pin Molex Power Connector

MECHANICAL/ENVIRONMENTAL
Board Dimensions: W: 5.7" x D: 4.0" x H: 1.6" (W: 146 mm x D: 102 mm x H: 40 mm)
Operating Temperature: 32 ~ 140°F (0 ~ 60°C)
Relative Humidity: 0 ~ 95% (non-condensing)
Approximate Weight: 0.3 Kg
OS Software Supported: All popular Operating System Software including MS DOS, LINUX, Windows 3.11 / 95 / 98 / NT / 2000 / XP. Not all features are guaranteed to work under every O/S.

Ordering Options:

3302130A	3.5" Embedded Controller with Embedded Intel Celeron M 1.0 GHz Zero Cache Processor, FSB up to 400 MHz, one 200-pin SO-DIMM Socket supporting up to 1.0 GB DDR 200/266 MHz SDRAM (solder-side), Intel 852GM and ICH4 Chipsets, one Mini-PCI Socket, one ATA-33 IDE Channel, Intel Chipset CRT SVGA, 18/36-bit SINGLE Channel LVDS, DUAL Mode Independent Display, SINGLE Intel 82562ET 10/100 LAN, two Serial ports, six USB ports - version 2.0, one 8-bit GPIO, AC-97 Audio, and one Compact Flash Type-I/II Socket (solder-side).
3302130B	Same as 3302130A, but with an Intel Celeron M 600 MHz Processor instead of an Intel Celeron M 1.0 GHz Zero Cache Processor
1204150	Cable Kit for 3302130A: one Audio Cable with Bracket – 2 x 5-pin – pitch = 2.0 mm – length = 250 mm two type A version 2.0 USB Cables – 2 x 5-pin – length = 250 mm one COM Flat Cable – 1 x DB9 to 2 x 5-pin – pitch = 2.0 mm – length = 320 mm one LPT to FDD Cable – 20-pin (pitch=2.0 mm) to 34-pin (pitch=2.54 mm)–length 300 mm one IDE Cable with SR – 40-pin to 44-pin – pitch = 2.0 mm – length = 290 mm one Printer Cable – 2 x 10-pin – pitch = 2.0 mm – length = 290 mm one Y Cable with EMI – PS2 (Black) to 2 x PS2 (Green and Purple) – length = 190 mm one ATX Power Cable – ATX Connector – length 300 mm

If you ever have a question about a product or procedure on our site, please call at:
(603) 886-3900 or toll free at (800) 833-8999

We also recomend:

Home Clearance Site Latest Products My Account BUILD IT! Request a Quote