Features: - ETX Carrier Board
- one PC/104-Plus (ISA + PCI) socket, reserved NVRAM socket for the optional 512 KB battery backed SRAM (NVRAM)
- one PCMCIA slot - supports CardBus 32-bit and 16-bit cards
- one 44-pin IDE channel - supports up to two IDE devices
- Intel Chipset CRT SVGA from ETX Module (3312520)
- SINGLE or DUAL Channel LVDS from ETX Module (3312520)
- SINGLE Intel 82562ET 10/100 LAN from ETX Module (3312520), SINGLE VIA VT6105 10/100 LAN via PCI interface
- two Serial ports from ETX Module (3312520) and two Serial ports via ISA interface, four USB ports - version 2.0, one PS/2 Keyboard/Mouse port
- Audio Out and Mic In from ETX Module (3312520)
- two Compact Flash sockets (one internal and one external access on solder-side)
|
| GENERAL |
|---|
| Form Factor: ETX Carrier Board | | Enhanced IDE Interface: one 44-pin IDE channel - supports up to two IDE devices |
|
| AUDIO/VIDEO |
|---|
| Audio Interface: Audio Out and Mic In from ETX Module (3312520) | | VGA Interface: Intel Chipset CRT SVGA from ETX Module (3312520) | | LCD Interface: SINGLE or DUAL Channel LVDS from ETX Module (3312520) |
|
| EXPANSION INTERFACE |
|---|
| Solid State Disk: two Compact Flash sockets (one internal and one external access on solder-side) |
|
| ETHERNET |
|---|
| LAN Interface: SINGLE Intel 82562ET 10/100 LAN from ETX Module (3302050), SINGLE VIA VT6105 10/100 LAN via PCI interface |
|
| I/O |
|---|
| Serial Ports: two Serial ports - RS232 from ETX Module (3302050) and two Serial ports - RS 422/485 via ISA interface | | Parallel Port: one bi-directional Parallel port supports EPP/ECP modes | | USB Ports: four USB ports - version 2.0 (two in front and two in rear) | | PS/2 Ports: one PS/2 Keyboard/Mouse port | | Expansion Slot: one PC/104-Plus (ISA + PCI) socket, reserved NVRAM socket for the optional 512 KB battery backed SRAM (NVRAM), one PCMCIA slot - supports CardBus 32-bit and 16-bit cards |
|
| POWER |
|---|
| Power Consumption: Warning: if you use 9V ~ 12V voltage, please change the JP4 to 1-2, and not +12V and -12V power output. Default JP4 is 3-4 while you use 13V ~ 36V voltage | | Power Management: onboard DC to DC circuit support Power Input Range from +9V to +36VDC, Standard Configuration for System is +24VDC |
|
| MECHANICAL/ENVIRONMENTAL |
|---|
| Board Dimensions: W: 9.4" x D: 6.7" (W: 240 mm x D: 170 mm) | | Operating Temperature: -4 ~ 140˚F (-20 ~ 60˚C) | | OS Software Supported: All popular Operating System Software including MS DOS, LINUX, Windows 3.11 / 95 / 98 / NT / 2000 / XP. Not all features are guaranteed to work under every O/S. |
Ordering Options:
|
| 1007770 | ETX Carrier Board, one PC/104-Plus (ISA + PCI) socket, reserved NVRAM socket for the optional 512 KB battery backed SRAM (NVRAM), one PCMCIA slot - supports CardBus 32-bit and 16-bit cards, one IDE channel, Intel Chipset CRT SVGA from ETX Module (3312520), SINGLE or DUAL Channel LVDS from ETX Module (3312520), SINGLE Intel 82562ET 10/100 LAN from ETX Module (3312520), SINGLE VIA VT6105 10/100 LAN via PCI interface, two Serial ports from ETX Module (3312520) and two Serial ports via ISA interface, four USB ports - version 2.0, Audio Out and Mic In from ETX Module (3312520), and two Compact Flash sockets (one internal and one external access on solder-side). | | 3312520 | 3312520 FANLESS Low Power ETX CPU Module |
|
