| Input Voltage: 95 ~ 132 VAC, 180 ~ 264 VAC Auto Range |
| Input Frequency: 47 ~ 63 Hz |
| Input Current: 12A(RMS)@115VAC, 6A(RMS)@230VAC |
| Output Voltage: +3.3V & +5V≤160W, +12V total ≤480W |
| Holdup Time: 16 ms minimum |
| Over Voltage Protection: Full functional over voltage / current protection |
| DC Load Requirement: +3.3V Min: 0A (The +5V and +3.3V total output shall not exceed 160W) |
| DC Load Requirement: +3.3V Max: 24A (The +5V and +3.3V total output shall not exceed 160W) |
| DC Load Requirement: +5V Min: 0A (The +5V and +3.3V total output shall not exceed 160W) |
| DC Load Requirement: +5V Max: 30A (The +5V and +3.3V total output shall not exceed 160W) |
| DC Load Requirement: +12V Min: +12V1;1A, +12V2;1A, +12V3;0.5A, +12V4;0A (Total Current of +12V1~+12V4 power not to exceed 40A) |
| DC Load Requirement: +12V Max: +12V1;12A, +12V2;12A, +12V3;18A, +12V4;18A (Total Current of +12V1 ~ +12V4 power not to exceed 40A) |
| DC Load Requirement: -12V Min: 0A |
| DC Load Requirement: -12V Max: 1A |
| DC Load Requirement: 5VSB Min: 0A |
| DC Load Requirement: 5VSB Max: 2A |
| Connector: one ATX 2.0 20+4-pin ATX, one 4-pin +12V P4 Auxiliary, nine 4-pin HDD/CDROM, one FDD, and two SATA power connectors |
| Other: Efficiency: 70% |
| MTBF: 100,000 hrs |
| Operating Temperature: 32 ~ 122˚F (0 ~ 50˚C); 100 ~ 122˚F (40 ~ 50˚C) derating curve |
| Storage Temperature: -40 ~ 158˚F (-40 ~ 70˚C) |
| Dimensions: W: 5.5" x D: 5.9" x H: 3.4" (W: 140 mm x D: 150 mm x H: 86 mm) |
